Chassis: Zip bullett modified for long circuit racing, Stockman rear wing, removable second rail and rear torsion bar. Steering column mounted shifter and clutch. Iceman onboard computer, new brake seals.

Spares: 1xset stubb axles, 3x sets rims including 1x set wets, 2x sets rear hubs, spare engine side (side pod), 3x front sprockets, 6x rear sprockets, 1x shifter cable, spare jets and needles, tyre bead breaker, compression ring for tyre inflation, kart stands.

Engine: 94 RS125, 2 meetings since top and bottom end re-build, PWK carby w/powerjet, 03 HRC spec. pipe + original HRC muffler (repacked), new steel clutch plates + springs, brand new complete ignition

Engine spares: complete spare top end, 2x spare cranks, complete spare ignition, complete gasket kit for rebuild, various sized base gaskets, 94RS125 workshop manual.

 $5000  - PRICE REDUCTION

Regards,  Rob Monaghan Ph: 0419 778 627

ITEMS FOR SALE

·        2 Sets of wheels & tyres 5/11-6 & 8/12-6                 ·        Full set of zip eagle brakes including discs

·        1 new front faring including chassis frame                    ·        All front end adjustment rods

·        1 aim micron electronic data system                           ·        Other minor accessories

(Will not separate)$800.00 the lot

Jason Gauci (Mobile: 0411437402)

Arrow AX9 4s with a rotax max engine mychron 4 kart will come complete ready to race must have current racing license ( AASA minimum) and be able to produce some sort of racing history.
Kart is currently CAMS log booked and complies with current CAMS rules and Standard Technical Regulations.
I can also supply a pit crew for the day at an extra cost
 
Please direct all enquiries to Jay Cutting 0450563128

Hyper.

Mk 2 chassis. Priced to sell at $7500.00. Raced 5 times since new for 4 wins and a 2nd. Winner 2009 NSW State Championship. Lap record holder Oran Park GP Track. THE BEST MAX IN AUSTRALIA. Contact the Superkart Club of NSW

have some wets for sale, I have run them on my 80cc and on the twin, the offset worked brilliant on the twin. I'm looking for $500. They're good for club meetings, but a bit hard for major events, also some new 6" rims for $200!!
 
 

John Roberts 02 6554 4632 or 0412 606 334

For Lease

On Board video camera. High quality with race meeting assistance including downloading.

$100 per meeting Click here to view sample Video of Eastern Creek State Titles by Jeff

Call Jeff Reed on 0417 250 460

(05/09/09)

For Sale
Tyre warmers , brand new $400 per set
Jeff Reed
0417 250 460

(05/09/09)

For sale (OR LEASE) is our Stockman. We have been in karts for 12 years and have decided to take a break so it all must go.
Stockman chassis ,2001 RS Honda, new crank and piston, Woodley barrel and head
V force reed block, Vortex programmable ignition, Autosports flat changer, Guhl bypass thermostat, Brand new Kelgates and uprights front and rear, Momo steering wheel, Titanium muffler, Full mil spec wiring harness with complete circuit breaker protection and isolation
2 sets of CRG magnesium rims, one with wets mounted
All engine spares we have, seals gaskets, spark plugs etc
Genuine workshop manual, Some special tools, Carburettor jets and needles
Spare used crank, replaced on mileage, HRC detonation counter
Odyssy battery and smart charger, Newly painted body
Complete spare brake system which the Kelgates replaced
Complete set of gears both front and rear.
Quick lift stand for use at the track
$14,000
No way could it be built for this price, ask my bank manager!!
Chris Parks

(12/09/09)

Wanted:

Later model RS125 motor in good working order. One that takes a later model piston kit (readily available). Contact Ian Ian.Mash@downeredirail.com.au

(12/09/09)

I have for sale A 2009 formula 1 rolling chassis. The kart is in immaculate condition and has done 6 races form new.
Formula 1  Karts are designed and manufactured using latest technologies and experience of professionals dedicated to Karting.
The Formula 1 gearbox range of proven race winning competitive quality karts.
Built with all the quick release and adjustment features expected from Formula 1 Karts to give you the competitive edge over competitors.
Only highest quality materials and components use including T45 aircraft specification steel to give one of the strongest and most flexible chassis.
Standard Features include:

Adjustable Camber
Adjustable Castor
Adjustable Front Track
Adjustable Rear Track
Wheelbase 1070mm
Adjustable Ground Clearance
Adjustable Corner to Corner Weight
Adjustable Steering Column Height

Self Adjusting Brakes
Ventilated Brake Disc
Ventilated Front Brake Discs
Aeroquip Brake Hose and Fittings
Quick Release Seat System
Quick Adjustable Brake Bias
Quick Release Front Bumper
Quick Release Axle Carriers
F1 Split Sprocket System
Hollow 35mm Axle
Suede Steering Wheel
Radiator  
Polypropylene Floor Tray
For a complete kart ready to race i would like around $12000 for this outfit or as a roller about $5000 ono.

If you would like it as a complete outfit I have available a 2000 Honda CR motor Tuned and maintained by viper racing with a Merlin exhaust system with a matching Dellorto 39.5mm carburetor and ignition system.

The engine is fresh and has just been run in after a full rebuild
for more info call on 0434945838 or email charlie.elliott@live.com.au please email for pictures.

Also available in exactly the same spec as above is a 2006 chassis and can also be supplied as a complete kart ready to race for around $8500 or as a roller for $3800.

(24/11/09)